Complete Brake Service & Safety Check
at Ember Automotive
Brakes in Dubai's stop-start traffic and extreme heat degrade faster than anywhere else in the world. Brake fade, warped discs, and overheated fluid are common — and dangerous. At Ember Automotive we perform a full brake system audit: measuring disc thickness, checking pad depth, testing fluid quality, and scanning the ABS/ESC system for fault codes. We then give you an honest written report and quote before touching a single component.
What's Included
Brake Pad Inspection & Replacement
We measure remaining pad depth and replace with OEM-quality pads matched to your vehicle's specification.
Disc Resurfacing & Replacement
Warped or thin discs are resurfaced or replaced. We never recommend replacement if resurfacing is a safe option.
Brake Fluid Flush & Replace
DOT fluid absorbs moisture over time, lowering its boiling point. We flush and replace with the correct specification.
Calliper Service & Overhaul
Seized callipers cause uneven brake wear and pulling. We service, lubricate, or replace callipers as required.
ABS & ESC System Diagnostics
Full ABS, ESC, and brake system scan using our multi-brand OBD2 tool to clear faults and verify correct operation.
Handbrake Adjustment
Stretched handbrake cables and worn mechanisms adjusted to correct engagement specification.
Brake Line Inspection
All flexible and rigid brake lines inspected for corrosion, leaks, and damage under the vehicle.
Post-Repair Brake Bedding
All new pads and discs are bedded in correctly on our test drive to ensure optimal initial braking performance.
How It Works
Book a Brake Check
Same-day brake appointments available. Contact us via WhatsApp, phone, or online.
Full Brake System Inspection
We measure, photograph, and scan every component of your brake system — front and rear.
Written Report & Quote
Receive an itemised report with photos and a fixed quote for any recommended work.
Your Approval First
No brake work is carried out until you've approved the quote — in writing or via WhatsApp.
Expert Brake Service
Our certified technician carries out the work to OEM specification with quality-tested components.
Road Test & Warranty
A supervised road test verifies brake performance before handover. All work is fully warranted.
Squealing or grinding noises, a pulsating pedal, or a car that pulls to one side when braking are all signs of brake wear or failure. In Dubai's high-temperature environment, worn brakes can fail completely with very little warning. Book a brake inspection immediately.
Frequently Asked Questions
Most modern cars give a brake wear warning light. However, a high-pitched squeal on braking is a reliable indicator. We recommend a brake inspection every 20,000 km or 12 months, whichever comes first.
Not always — if the disc is above minimum thickness we can resurface it on a lathe, which is significantly cheaper than replacement. We'll always measure before recommending.
Every 2 years or 40,000 km — whichever comes first. In Dubai's heat, moisture absorption is accelerated. Old fluid dramatically increases stopping distances.
Yes. We scan the ABS/ESC module, identify faulty wheel speed sensors, pumps, or modules, and repair or replace them.
All brake pads and discs carry a minimum 6-month / 10,000 km parts warranty. Labour is warranted for the same period.
Book Your Brake Inspection Today
Same-day brake service available. OEM-quality parts. Full safety warranty.
